LG 32LD350 USB 解除封印

March 16, 2011 10 Comments



等了兩個月終於盼到富邦的刷卡禮: LG 32LD350

不過之前在找這台電視的資料時, 意外發現它有隱藏版功能, 就是宣稱只是更新韌體用的USB插槽其實可以拿來放音樂 看影片~ 只是被封印起來了.
於是google了一下, 找到了這篇文章

雖然這篇似乎舊了點, 但步驟基本上是對的.我稍微把我的步驟說明一下:

OK, 開始前最重要的工具就是開啟密碼所需的遙控器: 我的N95搭配Psiloc irRemote這套軟體, 當然聽說用萬能遙控器也可以, 只不過手上就有手機可以用了幹嘛多花錢呢?
安裝完後再下載這個 (把.ir檔放到手機裡面然後開啟就會直接加入到irRemote 的Devices裡面了)
開啟後就如同下圖:
  • 然後長按著2不放直到出現密碼視窗:

  • 輸入密碼 0413 後就會進入EZ-ADJUST的畫面:

  • 選擇 Tool Option3 > 將 EMF(JPEG,MP3)及Divx 兩個選項都設為1 :
  • 關機後再打開, 將有音樂或圖片的USB插入試試, 發現選單目錄就會多了"我的媒體", 然後就可以聽音樂看影片囉~ Enjoy it! :


常見問題:
1. 手機軟體可以用Free Licence的方式啟用(需要約1.5歐元), 但是必須Send Application給不同的人(傳一次可以獲得約0.1歐元), 我的做法是一直send給自己... 0rz
2.有網友說用萬能遙控器聽說也可以開啟:
...I found a universal remote in my garage model Sentry RMC-10. I programmed the remote to work on my TV but failed to access the EZ-Adjust menu several times. Then I accidentally push "DVD" and hold "menu" for " five seconds" and the code menu popped up. I was so suprised....
3.有網友測出可以接USB HUB同時使用兩個USB:
For model 32LD350 in "EZ Adjust":
Tool Option2 - USB Count: 2
Tool Option5 - USB Hub Count: 1
You will run two device simultaneously with a USB hub.

4. 使用電腦接RS232開啟的方法(from here):

...I thought to build Remote control for LCD TV running on my Laptop and communicate with TV via serial port (RS232). The source code for this application is attached here and setup for this application is here. If .net framework 4.0 is already installed on you system you may download executables only.

What else you will need to run this:

  1. Cable (RS232);
  2. USB to Serial Convertor (If your system doesn’t have COM port)

Before running this application you need to identify the com port on which your TV is connected. Run the application, select correct COM port and click on button “On” (Communication).

How to enable DIVX and movie capability on LG 42LD450 using null wired serial cable

  1. Switch on your TV, go to the option menu and Set ID to 1.
  2. Connect PC via COM port or USB2COM adapter into RS232 connector on the TV
  3. Run any terminal program on the PC (hyperterminal for example)
  4. Set following parameters for COM port: speed 9600 flow control: none. All other leave at the defaults.
  5. In terminal enter: "af 0 ff" and press enter You should get following response "f 00 OK8c04x"
  6. To activate Media player enter: "af 0 0cc 040" and press enter.
  7. Restart TV. Menu submenu USB should appear in the main TV menu.
  8. If anything goes wrong, just restore the Tool option number enter "af 0 08c 040" and press enter.

10 comments:

  1. 請問 如果沒有nokia的手機 還有什麼方法可行嗎

    那個萬用遙控器那邊 我看不是很懂

    有請版大 指點

    謝~

    ReplyDelete
  2. 我想應該就是市面上那種兩三百塊的萬用遙控器
    但我也沒嘗試過, 可能的情況就是電視會有反應但不 知 道要按哪個鍵才會出現密碼視窗!!
    你可以嘗試看看了, 這是我找到的相關討論文章, 不過文章內說到的遙控器似乎台灣找不到...
    http://www.hifi-remote.com/forums/viewtopic.php?p=92399&sid=ed64a2bd45c2a2883845ab786e86fb72

    ReplyDelete
  3. http://prede.eu/lg-usb-port-hack-deblocare-port-usb-tv-lg?replytocom=86
    這是在google搜尋到的一些資訊提供你參考

    ReplyDelete
  4. 感謝大大分享
    HUB 開啟成功 但是限制只能用兩個USB PORT.
    我是用紅外線二極體接耳機孔 + MP3剝放(模擬該訊號)成功的

    需要細節的人 GOOGLE 的到. :D

    ReplyDelete
  5. 我使用紅外線二極體接在耳機孔 然後剝放MP3 模擬紅外線訊號成功的
    網路GOOGLE的到 需要的人可以參考.

    開啟HUB功能後 限制只能接2個USB.

    有人開WIFI 成功嗎?

    謝謝

    ReplyDelete
  6. 給留言的DiDi Qiu: 因為有您的電話我就不方便直接回覆~
    很抱歉沒辦法幫你了, 我手上的N95已經送人了, 所以目前手上也沒工具可以開啓了 =.=

    ReplyDelete
  7. 話說現在有android手機可以解決的方法嗎~?
    NOKIA這隻我沒有 :(

    ReplyDelete
    Replies
    1. 理論上手機有紅外線裝置的應該都可以

      Delete
  8. 大大請問是下載個版本呢?我點進連結都失效了,是否能提供連結呢?

    ReplyDelete
    Replies
    1. 沒有就沒辦法了,畢竟是2011年的事了

      Delete